If you know which pesticides were used, start by contacting the manufacturer of the product(s). The name of the manufacturer is on the product label. They know whether the product is watery or oily. They know all of the product ingredients, and how to break them up. However, they may not know how to clean up the kind of messes that result from pesticide misuse in homes. For example, it's possible that no one has ever evaluated how agricultural pesticides interact with carpet, linoleum, or wood.
If you don't know which pesticides were used, don't try any cleanup method, even household cleaners, without getting some advice from a professional. Some pesticides may react badly with acids or bases, and a few pesticides even react with water.1 Consider contacting an industrial hygienist or a remediation expert in your area. Your local health department may be able to provide technical advice and site-specific evaluations. To learn about a specific pesticide, including its toxicity and persistence, call the National Pesticide Information Center at 800-858-7378.
There are no standard cleaning rules for removing unwanted pesticide residue from building materials, and there are many potential dangers to avoid. Consider hiring a professional, especially if pesticides were misused or over-applied in your home.
If a professional applicator over-applied pesticides in your home, call the authorities.
There should never be puddles or piles of dust after a proper pesticide application.
There is no simple set of rules that can determine whether cleanup is necessary, or how much. A professional could help you identify your main concerns, and evaluate the level of contamination in your home. Pesticides are often found in homes at low levels, even without a history of misapplication.
Potential questions for the applicator:
Which product was used? What is the EPA registration number?
How exactly was the product diluted?
Which rooms were treated?
Were any wall voids treated?
How much material did you use in total?
Gather as much information as possible about where the pesticide was applied. For example, if it was applied to cracks and crevices, ask the applicator how high up the wall and how much of the floor they treated.
It is very difficult to tell how much pesticide residue is too much in order to protect the health of residents. It depends on the toxicity of the chemical(s) involved, the frequency of contact with contaminated surfaces, how likely the chemical is to volatilize into breathable air, the sensitivity and habits of the residents, among other factors. You might consider consulting with an industrial hygienist who could help you make an informed decision about whether clean up is necessary.
Before you pursue laboratory analysis of any kind, ask about whether the results can be interpreted to meet your needs. Some laboratories offer analytic services without interpretation, leaving people to guess about the meaning of test results.
For drinking water, there are published Maximum Contaminant Levels (MCLs) for many pesticides. That makes it easy to interpret pesticide detections in drinking water. Was the detected level above or below the MCL? For air samples, some risk-based values are available as well.2 For surface swipe samples, there are no such numbers available for easy comparison. For that reason, it may not be useful for the layperson to rely on laboratory testing to determine whether cleaning procedures are needed to protect human health.3
Porous materials can absorb liquids and potentially dust, taking them deep inside. Non-porous materials don't allow liquids or dust to penetrate their surfaces, making them much easier to clean. Table 1 includes common items, identifying them as porous, semi-porous, or non-porous. It makes a big difference in determining how to clean, or whether to discard the item(s).
|Table 1. Porosity of common household materials4,5,6,7|
Some sealed countertops
It may not be possible to remove enough of the pesticide residue from porous and semi-porous items.4,6,8 For example, one study found that double mopping with detergent, followed by a rinse on a linoleum floor had no effect on the level of pesticide residue in a cotton swab test.8 Sometimes, porous and semi-porous items are discarded in the process of remediation.
While non-porous items are the easiest to clean, some residue might remain. If items are frequently handled by sensitive people like kids (think about toys and bottles) and the elderly (think about medical equipment, for example), there is potential for ongoing exposure. Depending on the situation, some items may need to be discarded.
Sealants can reduce the spread of some pesticides from contaminated surfaces.6,11 However, they may not be appropriate for all surfaces or scenarios. A professional could help you make an informed decision. If you use a sealant, follow the manufacturer's instructions.
It's preferable to follow the pesticide manufacturer's recommended strategy for cleaning up messes. They are the only ones who know which sticking agents were used in the product, and possibly, how to break them up best.
If you hired a company, they should manage disposal. If not, call your local waste management agency/company. Ask whether or not there are regulations that apply to your situation. They will likely ask you about the pesticide(s) involved, and about the items you plan to discard. Potential questions include:
Call your local wastewater authority. Ask whether or not there are regulations that apply to your situation. Potential questions include:
Bleach may react with some pesticide chemicals. Reactions can result in more toxic chemicals, unexpected vapors, or other problems.1,4,5 If you have identified the specific product involved, ask the product manufacturer whether bleach or detergent is recommended. Lacking the necessary information, avoid using bleach. Products that contain sodium hypochlorite are bleach products.
If the pesticide is a dust or leaves dust behind, try to minimize air movement. Turn off air-handling systems and close windows. Dry dust can be cleaned using wet methods to reduce its movement into the air. However, adding moisture can cause chemical reactions.1 Consult a professional before wetting pesticide dust.
If the pesticide is a liquid, ventilation will be helpful. As air moves through the structure to the outdoors, chemicals in the air will be carried out.
If the specific product can be identified, read the product label and the Safety Data Sheet (SDS), provided by the manufacturer. They will identify the kind of equipment needed to apply or handle the product. Those instructions are based on the manufacturer's unique knowledge of the product. If the exact product cannot be identified, don't guess, and don't rely on a simple internet search. Dozens of products can share the same name, but they might have different ingredients and require different equipment (i.e., gloves, goggles, etc.) for handling.
If the pesticide was applied as a dust, consider using a mask designed for small particles, rather than vapor. Safety glasses that fit firmly against the skin will prevent dust from irritating the eyes. Booty covers may be helpful, especially when shoes have laces or fabrics capable of trapping dust.12,13
If the pesticide was applied as a liquid, consider using a mask designed for organic vapors and small particles.13 Protect the skin from contact with liquids used in the cleaning process. Avoid using gloves made of any porous material, such as leather or fabric.12
Barrier laminate gloves are highly resistant to chemicals in all eight EPA chemical resistance categories.12 However, even highly resistant materials will not provide unlimited protection. They need to replaced or cleaned at the end of each day and rinsed during breaks. Other materials with lower levels of chemical resistance need to be cleaned or replaced after every 10-60 minutes of contact.
In 2002-03, researchers looked for pesticide residue in vacuum dust and kitchen floor wipe samples in Boston area public housing. Pesticide residues were detected on every kitchen floor and in all vacuum dust. In about half of the homes, vacuum dust contained five or more pesticides. Similarly, all of the kitchen floor swipe samples contained at least three pesticides. Chlorpyrifos and permethrin were most commonly detected in kitchen floor samples, and the median concentrations found were 0.3 and 6.8 micrograms per squared meter (μg/m2), respectively. A microgram is one millionth of a gram. The maximum concentrations found were 19.5 μg/m2 chlorpyrifos and 226.5 μg/m2 permethrin.14
A similar study in 2002 evaluated pesticide residue in kitchen/dining floor wipes in 20 homes with children in the Salinas Valley of California. They also found chlorpyrifos and permethrin in the majority of homes (95%) in addition to diazinon (95%). The median concentration of chlorpyrifos was 0.046 nanograms per centimeter squared (ng/cm2), and the maximum concentration found was 0.20 ng/cm2. A nanogram is one billionth of a gram. For permethrin (trans), the median and maximum concentrations were 0.23 and 3.6 ng/ cm2, respectively.15
In New York state, a combination of farm, rural, and urban households (41) were sampled for pesticide residue in 2000 and 2001. The largest detection was in the carpet of a farm household during the summer months, 33 μg/m2. The maximum concentration found on a smooth floor surface was 13.6 μg/m2 of malathion.16 Among 90 randomly chosen homes in California, over 97% had detectable pesticide residues in floor wipe samples. The highest values detected were less than 2.0 ng/cm2.17
1 milligram (mg) = 1000 micrograms (μg) = 1,000,000 nanograms (ng)
It may not be possible to remove all detectable pesticide residues from household contents. In part, this is because modern laboratory methods can detect pesticides at very low concentrations. Many pyrethroids (i.e., permethrin, bifenthrin) can be detected in swipe samples if they contain 0.001-0.003 ng/cm2.17 One nanogram is one billionth of a gram, spread over one square centimeter. Just because it's detectable doesn't mean it can cause harm. The dose makes the poison. To determine the risk, an expert will consider the toxicity of the pesticide and the amount of expected exposure from living with contaminated items.3
Young children and elderly adults may be more sensitive to the effects of pesticide exposure for physiological reasons. Pregnant women, and people trying to conceive, should also avoid unnecessary exposures, in order to minimize the risk of potential birth defects. There are also individuals with medical conditions that put them at higher risk when exposed to pesticides. If you think neighbors in the building may be exposed, ask them about any medical conditions or sensitivity, and consider actions that will help them keep their exposure(s) low.
When a technician misused a concentrated insecticide containing malathion in Ohio homes in 2010, authorities recommended a screening value of 15 μg/100 cm2 on surfaces. Initially, all porous items were removed and discarded. Non-porous surfaces were wiped down with warm water and bleach. After initial cleaning attempts were ineffective, experts recommended more cleaning and removal of baseboards. Further, they recommended a polyurethane sealant on floors where carpeting had already been removed, covered by a new layer of plywood under new flooring.6
In conclusion, it may not be possible to easily determine the risk level when pesticides have been misused in a home. In many cases, it takes a team of professionals to determine the best strategy and evaluate its effectiveness. They have to consider effective methods and the risk to workers. They often test residue levels before and after cleanup activities, finding that some methods don't work as expected. Getting professionals involved, such as industrial hygienists, the pesticide product manufacturer, and/or remediation professionals, can lower the risk of cleanup activities and increase your chance of success.
Disclaimer: The information provided in this fact sheet is intended to be helpful as individuals make their own decisions about whether and how to clean up materials within the home. No guarantee of safety or warranty of cleaning effectiveness is intended or implied. None of the information provided can supersede applicable regulations or pesticide product label(s). If decontamination guidance is provided by a pesticide product manufacturer, it should be considered first. No legal obligations or rights are conferred by this document. Any mention of trade names or commercial products does not constitute an endorsement by NPIC or by Oregon State University. The information in this fact sheet does not necessarily represent the view of the US Environmental Protection Agency or that of Oregon State University.
For more detailed information about cleaning up after indoor pesticide use please visit the list of referenced resources below or call the National Pesticide Information Center, Monday - Friday, between 8:00am - 12:00pm Pacific Time (11:00am - 3:00pm Eastern Time) at 1-800-858-7378 or visit us on the web at http://npic.orst.edu. NPIC provides objective, science-based answers to questions about pesticides.
Please cite as: Buhl, K.; Bond, C. 2016. Cleaning Up After Indoor Pesticide Misuse; National Pesticide Information Center, Oregon State University Extension Services. http://npic.orst.edu/factsheets/cleanup.html.
NPIC fact sheets are designed to answer questions that are commonly asked by the general public about pesticides that are regulated by the U.S. Environmental Protection Agency (U.S. EPA). This document is intended to be educational in nature and helpful to consumers for making decisions about pesticide use.